SMOK LP2 Replacement Coils Series

Description

SMOK RPM 4 LP2 coils: Triple Seal Leak Protection Meets High-Wattage Performance, Now in Dubai, UAE

LP2 stands for Leak Proof 2 and the name reflects a genuine engineering priority. Where standard press-fit pod coils rely on one or two silicone O-rings to seal the coil-to-pod connection, SMOK LP2 coils use three silicone rings stacked at the critical sealing points, creating a noticeably more reliable barrier against e-liquid seepage and condensate buildup. 

Three resistance variants cover the full spectrum, the 0.23Ω mesh at up to 45W for maximum cloud DTL performance, the 0.4Ω mesh at 25W for a balanced RDL draw, and the 0.6Ω dual coil at 15-25W for a warm, flavor-focused MTL experience with nicotine salts. All three install with a simple press-fit, and all five coils in the pack deliver the same triple-ring sealing standard. 

The LP2 Difference: What Sets These Coils Apart?

Triple Silicone Ring Leak-Proof Architecture: These three rings are positioned at the top and base of the coil body to create multiple independent sealing barriers, if condensate manages to pass one ring, the next stops it. The result is a measurably cleaner vaping experience.

0.23Ω LP2 Mesh, Maximum Wattage DTL Performance: The highest-powered coil in the LP2 range, using a mesh heating element that heats e-liquid across a very wide, uniform surface area for dense cloud output and saturated flavor at wattages from 20W up to 45W.

0.4Ω LP2 Mesh, Balanced RDL Performance: A mesh coil at a middle-ground resistance that delivers the heat-up speed and vapor quality of mesh construction with a slightly more restricted draw. Rated best at 25W, it produces a warm, flavor-forward restricted lung draw.

0.6Ω LP2 DC Dual Coil, MTL with Warmth & Depth: A dual-coil configuration at 0.6Ω built specifically for mouth-to-lung vapers. The two parallel coil wires heat e-liquid simultaneously for a warmer, more flavor-saturated MTL draw.

Press-Fit Installation, Consistent Seating Every Time: The press-fit design means there is no thread cross-contamination risk and no overtightening. A consistent, secure seal every time without tools or technique.

Compatible SMOK Devices

• SMOK RPM 4 (LP2 Pod)
• SMOK Nord 50W (LP2 Pod)
• SMOK G-Priv Pod Kit
• SMOK G-Priv Pro Pod Kit
• SMOK Morph Pod-80
• SMOK Morph S Pod-80

How To Choose the Right LP2 Coil for Your Device and Style?

• For G-Priv or Morph Pod-80 at high wattage: The 0.23Ω LP2 Mesh exploits these devices’ higher output ceilings, delivering peak cloud density and flavor saturation at 35-45W. Pair with 70%+ VG freebase at 3mg for the best performance.
• For Nord 50W or RPM 4 at moderate wattage: The 0.4Ω LP2 Mesh at 25W is the balanced everyday option, enough vapor for a satisfying DTL or open RDL draw without demanding the full wattage range of higher-powered devices. Works well across all LP2-compatible devices regardless of their output ceiling.
• For MTL vapers and nic salt users on any LP2 device: The 0.6Ω LP2 DC is the dedicated MTL option, a tighter, more controlled draw with the added benefit of the triple-ring seal that specifically addresses the condensate accumulation that plagues MTL coils with frequent use of 50/50 and salt nic e-liquids.

Get Fast Delivery in Dubai, Abu Dhabi, Sharjah, Ajman

Three silicone rings. Wattage supports up to 45W for the 0.23Ω mesh. Three resistance options from full DTL cloud chasing down to focused MTL salt nic vaping. SMOK LP2 Coils deliver a meaningfully better leakproof experience within the LP2 platform, making them the definitive choice for RPM 4, Nord 50W, G-Priv, and Morph Pod-80 users. Choose your variant and place your order on Vape Dubai.

Frequently Asked Questions

What makes LP2 coils different? 

The LP2 coil series uses three silicone sealing rings rather than the one or two used in RPM and Nord coils. This triple-ring architecture reduces the e-liquid leakage and condensate gurgling.

Are LP2 coils compatible with the SMOK Novo 4? 

No, the SMOK Novo 4 uses the LP1 coil platform, which is a completely separate series. LP2 coils are only compatible with LP2 pods.

Which LP2 coil is best for nicotine salts? 

The 0.6Ω LP2 DC Dual Coil is the best match for nicotine salts and 50/50 e-liquids, operating at 15-25W with a tight MTL draw. 

Can I use LP2 coils in my Nord 4? 

The SMOK Nord 4 accepts LP2 coils if you are using a Nord 4 LP2 pod. Confirm which pod type your Nord 4 kit includes before purchasing LP2 coils.