5Pcs/Pack SMOK LP1 Coils Series

Description

Genuine SMOK LP1 Replacement Coils: Leak-Proof MTL Performance for Novo 4 and Compatible Devices

LP1 means Leak Proof 1. Four coil variants, all operating at low wattages between 10W and 17W, all sealed with three silicone rings at the coil-to-pod connection, and all focused on delivering the best possible MTL flavor from a device small enough to disappear into any pocket. Comes in a pack of 5 coils, press-fit installation, and fully compatible across the Novo 4 pod ecosystem. 

Key Features of LP1 Coils

• Triple Silicone Ring Leak-Proof Architecture: This triple-ring structure specifically addresses the condensate seepage common in compact MTL pod systems.
• Press-Fit Installation: No threading, no tools, no risk of cross-contamination from overtightening. A coil change takes seconds.
• Low-Wattage MTL Optimisation: Every LP1 variant operates between 10W and 17W, a wattage range specifically suited to the restricted airflow and flavor-concentration priorities of MTL vaping. 

All Four LP1 Coil Variants 

SMOK LP1 Coil Compatibility with Devices

• SMOK Novo 4 Pod Kit
• SMOK Novo 4 Mini
• SMOK Nfix Pro Kit
• SMOK Pozz Pro Kit
• SMOK RPM25 Pod Kit

LP1 vs LP2: Understanding the Difference

Both LP series share the same three-ring sealing philosophy but are designed for completely different device categories and vaping output levels. LP1 is for compact, low-wattage MTL pod systems. LP2 is for higher-powered pod mods capable of DTL and RDL performance.

How to Install and Prime an LP1 Coil

1. Remove the Novo 4 pod from the device body
2. Pull the old LP1 coil straight out from the base of the pod
3. Add 3-5 drops of your chosen e-liquid directly onto the coil’s cotton or mesh to pre-saturate
4. Push the new LP1 coil firmly into the pod base until it seats completely flush. The three silicone rings will compress against the pod wall to form the sealed connection
5. Fill the pod through the side-fill port and reseal the stopper
6. Allow the pod to sit upright for 5-10 minutes for full coil saturation, especially important for the 1.2Ω coil, whose tighter cotton wicking takes slightly longer to saturate fully
7. Reattach the pod to the Novo 4 device and begin at the lower end of the coil’s wattage range for the first 2-3 draws

Keep Your Novo 4 Performing at Its Best: Ready To Buy?

Four variants. Three silicone rings. One purpose. Clean, leak-resistant MTL vaping from SMOK’s most popular compact pod platform. Whether you want the softest balanced draw from the SMOK LP1 coil meshed 0.8Ω, the most flavor-intense experience from the DC MTL, a stronger throat hit from the Turbo Mesh, or the tightest nic-salt-friendly draw from the 1.2Ω, the LP1 series has a coil for every MTL preference. 

Order your SMOK LP1 Coils today on Vape Dubai and get fast delivery to Dubai, Abu Dhabi, Sharjah, and anywhere across the UAE.

Frequently Asked Questions

Are LP1 coils compatible with the SMOK Novo 4 Mini? 

Yes, LP1 coils are compatible with both the SMOK Novo 4 and the Novo 4 Mini. Both devices use the same LP1 pod and coil platform.

Can I use LP2 coils in my Novo 4? 

No, LP1 and LP2 are separate platforms and the coils and pods are not interchangeable. The Novo 4 uses LP1 pods and coils only. 

What nicotine strength works best with LP1 coils? 

The 0.8Ω and 0.9Ω variants work best with nicotine salts from 10-35mg and 50/50 freebase blends. The 1.2Ω Meshed coil is specifically suited to high-strength nicotine salts from 35-50mg.

How often should I replace LP1 coils? 

With correct priming, use within the rated wattage range, and 50/50 or nic salt e-liquids, LP1 coils typically last 1-2 weeks for regular daily users.