...

3500mAh AWT 18650 Vape Battery in UAE

The AWT IMR 18650 is a high-drain 3500mAh rechargeable lithium-ion battery built for vape mods and high-power devices, offering strong performance with a 35A pulse discharge rating at 3.7V. Its flat-top design ensures compatibility with most regulated single & dual-battery setups. Rechargeable via standard 18650 CC/CV chargers, it supports 800+ cycles.

AWT 18650 3500mAh Battery Specs:

  • Chemistry: IMR Li-ion (Lithium Manganese)
  • Capacity: 3500mAh nominal
  • Voltage: 3.7V nominal / 4.2V max charge
  • Max Pulse Discharge: 35A
  • Discharge: 10A 
  • Cycle Life: 800+ charge cycles
  • Dimensions: 18.2mm x 65.05mm
  • Positive Terminal: Flat top
  • Weight: 54g
  • Sold: Individually (single cell)

Price range: د.إ35.00 through د.إ60.00

Description

AWT IMR 18650 3500mAh Battery in Dubai & Sharjah: High-Capacity, High-Drain Power for Your Vape Mod

The 18650 lithium-ion cell is the power source for the majority of regulated vape mods in the UAE market, from single-battery compact mods to dual-battery high-output devices. The AWT IMR 18650 vape battery at 3500mAh and 35A maximum pulse discharge provides one of the best available combinations of energy capacity and discharge performance in the standard 18650 format.

The 3500mAh rating sustains longer runtime between charges or swaps, while the 35A pulse discharge capability provides sufficient current for regulated mod operation at wattages up to 80W in single-cell configurations and substantially higher in dual-cell setups. Buy a single cell or dual cell rechargeable 18650 vape battery from Vape Dubai.

IMR Chemistry: Safer for High-Drain Use

The AWT uses IMR (Lithium Manganese) chemistry, a safer formulation than standard ICR (Lithium Cobalt Oxide) for high-drain applications. IMR cells have a lower risk of venting with flame if they fail, which is why most reputable vape battery manufacturers use IMR or hybrid IMR chemistry for cells intended for vape mod use. The AWT IMR 18650 does not include a built-in protection circuit, it relies on the regulated mod’s own battery management system for over-discharge and over-current protection.

Technical Specifications

Spec Detail
Chemistry IMR Li-ion (Lithium Manganese)
Capacity 3500mAh nominal
Nominal Voltage 3.7V
Full Charge Voltage 4.2V
Max Pulse Discharge 35A
Discharge 10A 
Charging CC/CV 4.20V
Charging Current 1250mA (1.25A)
Cycle Life 800+ cycles
Dimensions 18.2mm x 65.05mm
Weight 54g max
Terminal Flat top
Protection None, unprotected IMR

Flat-Top Design: Compatibility With All Standard Vape Mods

The flat-top positive terminal is the standard for regulated vape mods, the spring-loaded battery contact in the battery bay makes contact with a flat-top cell more reliably and with less risk of contact failure than button-top cells in most mod battery trays. The AWT 18650’s flat-top design is compatible with every standard regulated single and dual 18650 vape mod in the UAE market.

Battery Pairing for Dual-Cell Mods

For mods that use two 18650 batteries, it is essential to use a matched pair of batteries from the same manufacturer, the same model, and ideally the same production batch. Using mismatched cells in a dual-battery mod causes one cell to discharge faster than the other, creating voltage imbalances that can shorten both cells’ lifespan and, in extreme cases, cause safety issues. If purchasing for a dual-cell mod, purchase two 18650 box mod batteries in Dubai and use them as a dedicated pair.

Charging Your AWT 18650 Safely in UAE

The AWT 18650 battery requires a quality Li-ion battery charger that supports 18650 cells, the CC/CV (Constant Current / Constant Voltage) 4.20V charging method is the correct protocol. Recommended charging current is 1.25A for standard charging, producing a full charge in approximately 3 hours from empty. The cell can accept higher charging currents (up to the rated fast-charge rate) for shorter charge times but sustained high-current charging increases heat generation and can marginally reduce the number of cycles the cell provides over its lifetime.

Critical safety rules for 18650 charging:

  • Never leave charging cells unattended
  • Always charge on a non-flammable surface
  • Never charge cells that show signs of physical damage, swelling, or wrapper tears
  • Remove cells from the charger immediately upon reaching full charge
  • Store charged cells in a protective case away from metal objects, coins, and keys

When to Replace Your AWT 18650 Vape Battery?

Replace your AWT 18650 when:

  • The cell no longer holds a full charge, if a cell that previously lasted 6 hours now lasts 3 hours, capacity has degraded significantly
  • The wrapper (outer plastic sleeve) shows any tears, cuts, or damage, a bare 18650 cell with an exposed metal casing can short-circuit against other metals
  • The cell feels noticeably warm during normal use at wattages well within the rated discharge range
  • The cell has been in use for more than 18-24 months of daily charging
  • Any visible swelling of the cell casing

3500mAh of high-capacity IMR power. 35A pulse discharge. Flat-top for all standard regulated mods. 800+ cycle lifespan. The 18650 that keeps your single or any dual-cell mod running through a full day in Dubai. Order yours today at Vape Dubai for fast, reliable delivery across Dubai, Abu Dhabi, Sharjah, and anywhere across the UAE.

FAQs

Is the AWT 18650 3500mAh battery compatible with the Vaporesso GEN SE 80W? 

Yes, the AWT 18650 flat-top fits the GEN SE battery bay and supports the GEN SE’s 80W maximum output within the recommended operating range. For sustained heavy use at 80W, any additional thermal load should be monitored.

What is the 35A pulse discharge? 

Pulse discharge (35A) is the maximum current the battery can safely deliver in short bursts, typically the brief spike that occurs at the start of each draw on a regulated mod. 

Do I need two AWT 18650 cells for the GEN Max or Armour Max? 

Yes, dual-battery mods require two matched cells. Purchase two AWT 18650 3500mAh batteries simultaneously and use them exclusively as a pair, always charge together and replace together when either cell shows signs of capacity degradation.

How do I know if my AWT 18650 cell is genuine? 

Genuine AWT 18650 cells have consistent, tightly applied wrapper printing with a clear AWT logo and specification text. Significant spelling errors, blurry printing, or inconsistent wrapper application are indicators of counterfeit products.

Can I charge the AWT 18650 in my mod via USB? 

Yes, most regulated mods with onboard charging support 18650 cells via USB Type-C or Micro-USB. However, in-mod USB charging is typically slower than a dedicated external charger and may charge at lower current.

Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.