Description

Voopoo PnP Coils, Plug ‘n’ Play:  The Most Versatile Replacement Coil System in Vaping in Dubai

“Plug ‘n’ Play” is exactly what it says. Voopoo designed the PnP coil platform around the simplest possible coil replacement experience, press the coil in, and it locks. No threading. No O-ring alignment. No tools. Just a firm press and a clean connection every time. But the simplicity of the installation system is only half the story. 

What makes the PnP range genuinely exceptional is the breadth of what it covers. Over a dozen mesh coil variants spanning resistances from 0.15Ω to 1.2Ω and wattage ranges from 8W to 80W, covering every vaping style from the tightest MTL draw to full-open DTL cloud production, compatible across Voopoo’s entire PnP device range. 

Purchase your preferred coil from Vape Dubai with fast delivery across Dubai and the entire UAE.

How to Choose Your PnP Coil? 

The PnP range can look overwhelming at first. The practical decision comes down to three questions: 

What style do you prefer?

What wattage can your device reach?

What nicotine strength are you using?

• For DTL / Full Direct to Lung, open draws, big clouds, lower nicotine (≤10mg, high VG e-liquid): Choose PnP-VM6 (0.15Ω, 60-80W), PnP-VM5 (0.2Ω, 40-60W), or PnP-TW15 (0.15Ω, 55-70W). These fire at high wattage and produce dense, warm vapor.
• For RDL / Restricted Direct to Lung, slightly restricted draw, mid-nicotine (≤10-25mg): Choose PnP-VM1 (0.3Ω, 32-40W), PnP-TW30 (0.3Ω, 28-40W), or PnP-VM3 (0.45Ω, 25-35W). These offer a draw that sits between open cloud vaping and conventional MTL.
• For MTL / Mouth to Lung, tight cigarette-like draw, higher nicotine salts (20-50mg): Choose PnP-VM4 (0.6Ω, 20-28W), PnP-TM1 (0.6Ω, 20-25W), PnP-DW60 (0.6Ω, 18-23W), PnP-TM2 (0.8Ω, 12-18W), or PnP-DW80 (0.8Ω, 12-16W). These produce smooth, flavor-concentrated draws ideal for salt nic e-liquids. 

Always match the coil’s wattage requirement to your device’s output range. Don’t run a 60W coil in a 40W device.

Voopoo PnP Coils Features

• 5 Coils Per Pack: Multiple weeks of vaping depending on usage frequency
• Different Variants: Resistances from 0.15Ω to 1.2Ω for every vaping style
• All Mesh Construction: Wide surface area for faster heat-up and consistent flavor output
• Press-Fit Installation: No tools, no threading. Install in seconds, every time
• DTL Variants (0.15-0.3Ω): For cloud production, high VG, low nicotine e-liquids
• RDL Variants (0.3-0.45Ω): For a balanced, slightly restricted half-DTL experience
• MTL Variants (0.6-0.8Ω): For tight, flavorful draws with salt nic e-liquids
• Organic Cotton Wicking: Pure, clean flavor with no chemical aftertaste
• Wide Device Compatibility: Works across all Voopoo PnP-platform devices
• Genuine Voopoo: Original manufacturer coils, consistent quality and spec accuracy

Full PnP Coil Technical Specifications

Compatible Devices

The Voopoo PnP Coil series is compatible with all Voopoo devices on the PnP platform, including:

• Voopoo Vinci 2 / Vinci X 2
• Voopoo Vinci 3 / Vinci X 3
• Voopoo Drag S / Drag X / Drag H80S
• Voopoo Argus GT / Argus Pro / Argus Air
• Voopoo Drag Q / Doric 20 / Doric Q
• Voopoo NAVI / V.SUIT and all other PnP-platform devices

Always verify your device’s maximum wattage output matches or exceeds your chosen coil’s minimum wattage requirement before purchase.

How to Prime and Install PnP Coils

1. Pull the old coil straight out of the pod base
2. Add 3-4 drops of e-liquid directly onto the mesh surface of the new coil
3. Press the coil firmly into the pod base until it clicks into position
4. Fill the pod with your preferred e-liquid
5. Wait 5-10 minutes for the cotton to fully saturate before vaping
6. Start at the lower end of the recommended wattage range and adjust upward

Order Voopoo PnP Coils Online in UAE

Whether you’re pulling deep DTL clouds at 70W or taking tight salt nic MTL draws at 12W, the Voopoo PnP coil range has the exact mesh coil variant you need, and the press-fit system gets it installed in under a minute. 

Over 12 variants, organic cotton wicking, genuine Voopoo manufacturing, and compatibility across every PnP device in the range. Order your preferred variant today on Vape Dubai and get fast delivery in the UAE.

Frequently Asked Questions

How do I choose the right PnP coil resistance for my vaping style? 

Use 0.15-0.3Ω for open DTL vaping with low nicotine and high VG e-liquids. Use 0.45-0.6Ω for RDL or half-DTL. Use 0.6-0.8Ω for MTL vaping with salt nicotine e-liquids. 

How many Voopoo coils come in each PnP coil pack? 

Each pack contains 5 PnP coils of the same variant.

How long does each PnP coil typically last? 

Most vapers get 5-10 days per coil with regular daily use. Sweeter or heavily flavored e-liquids may reduce coil life.

Are all PnP coils compatible with every Voopoo device? 

PnP coils are compatible with all Voopoo devices on the PnP platform. However, high-wattage coils (0.15-0.2Ω) require a device capable of reaching the minimum wattage.

What is the difference between the VM, TM, TW, and DW PnP coil series? 

TW (TW15, TW20, TW30) are newer long-lasting mesh coils rated 25% longer than standard mesh. VM variants are single mesh coils across a full wattage range. TM variants are purpose-built mesh coils for MTL and salt nicotine use. DW variants are dual-wire mesh coils optimized for both MTL and pod systems.